Kit Contents - Pirate Tech 1/25 th Scale Model Camper

Pirate Tech Scale Models
Go to content

Main menu:

Kit Contents

Kit & Construction
 
the Pirate Tech Scale Model Travel Trailer is a 1/25 scale build it yourself hobby kit. The kit is a balsawood, cardstock and sheet plastic constructed model camper . Pre-printed and coated cardstock sheets are trimmed out and glued to sheet balsa wood or folded and glued into cabinets and various other components. It is recommended that general purpose white glue be used to glue cardstock sheets to balsa wood. White glue or carpenters glue can be used to fabricate cardstock components. A thorough review of the entire construction process is recommended before construction begins. Practice sheets are included in the kit to become familiar with the trimming and folding of cardstock details.
Enjoy !

Suggested materials and supplies you will need to construct your model:
· #1 & #2 Hobby Knife
· Carpenters or White Glue. Model Glue.
· Soft pine or equivalent work board
· Sewing Straight Pins
· Small hammer
· Steel scales or wood scales (6” & 18”) To help with cardstock folds.
· Wax paper
· Tooth picks
· Fine and Medium sandpaper / sanding block / Emery Boards / Tack Cloth
· Spray enamel paints (Chassis, Coach and Details)
· Acrylic Crafting Paint (Touching up Cabinets, Etc.)
· Scotch Tape
· Assortment of weights, blocks and carpenters square to true up the coach as it’s being fabricated.

The Model Travel Trailer is constructed in pieces (sidewalls, floor, ceiling, etc.) and then assembled into sub- assemblies. The sub-assemblies are then assembled together to complete the model.
The pre-printed sheets included in this kit are not color fast and will run together if they get wet. If you wish to protect from this then apply a light coat of clear finish and allow to dry before beginning construction.

Kit Contents:
· (5)     3/32 X 1/4 X 18 BALSA STICKS                
· (1)     1/16 SQ. X 18 BALSA STICK
· (1)     3/16 SQ. X 4 BALSA STICK
· (1)     1/16 X 3/8 X 18 BALSA STICK
· (1)     1/16 X 3/8 X 4 BALSA STICK
· (1)     3/32 X 3 X 18 BALSA SHEET
· (1)     1/32 X 3 X 9 BALSA SHEET
· (5)     1/16  X 4 X 18 BALSA SHEET
· (2)     1/4 DIA X 3 5/8 WOOD ROUND ROD
· (2)     1/4 DIA X 2 7/8 PLASTIC AXLE TUBES
· (5)     1” DIA WOOD TIRES
· (1)     PART# 33T-A  11” X 17” CHASSIS ASSEMBLY SHEET
· (1)     PART# 33T-B  11” X 17” INTERIOR SIDEWALLS NON PRINTED STICKY BACK SHEET
· (1)     PART# 33T-C  11” X 17” INTERIOR SIDEWALLS PRINTED CARDSTOCK SHEET
· (1)     PART# 33T-D  11” X 17” EXTERIOR DOORSIDE SIDEWALL CARDSTOCK SHEET
· (1)     PART# 33T-E  11” X 17” EXTERIOR ROADSIDE SIDEWALL CARDSTOCK SHEET
· (1)     PART# 33T-F  11” X 17” EXTERIOR CEILING-SHEETMETAL CARDSTOCK SHEET
· (1)     PART# 33T-G  11” X 17” INTERIOR CEILING-FLOOR PRINTED STICKY BACK SHEET
· (1)     PART# 33T-H  11” X 17” CHASSIS DETAILS CARDSTOCK SHEET
· (1)     PART# 33T-I  11” X 17” SEAT CUSHON-LAVY WALL PATTERN STICKY BACK SHEET
· (1)     PART# 33T-J  11” X 17” CABINETS 1 OF 3 PRINTED CARDSTOCK SHEET
· (1)     PART# 33T-K  11” X 17” CABINETS 2 OF 3 PRINTED CARDSTOCK SHEET
· (1)     PART# 33T-L  11” X 17” CABINETS 3 OF 3 PRINTED CARDSTOCK SHEET
· (1)     PART# 33T-M  8 1/2” X 11” CUSHION FABRIC COTTON SHEET
· (1)     PART# 33T-N  8 1/2” X 11” EXTERIOR WINDOW TRIMS CARDSTOCK SHEET
· (1)     PART# 33T-O  8 1/2” X 11” PRACTICE DETAILS CARDSTOCK SHEET
· (1)     PART# 33T-P  8 1/2” X 11” CLEAR PVC WINDOW MATERIAL
· (1)     PART# 33T-Q  8 1/2” X 11” PICNIC TABLE
· (1)     PART# 33T-R  8 1/2” X 11” AWNING FABRIC COTTON SHEET
· (1)     PART# 33T-X  8 1/2” X 11” INTERIOR CLEAR WINDOW PATTERNS
· (1)     3/16  X 6 X 8 FOAM BOARD FOR CUSHIONS
· (2)     .020 X 11 X 17 STYRENE SHEET
· (1)     STYRENE .080 Z CHANNEL X 2 3/4” LONG
· (1)     STYRENE .060 ANGLE  X 14” LONG
· (6)     STYRENE .100 ANGLE  X 14” LONG
· (1)     STYRENE .125 DIA. ROUND TUBING X 8 1/4” LONG
· (2)     STYRENE .125 DIA. ROUND TUBING X 4 3/4” LONG
· (2)     STYRENE .125 DIA. ROUND TUBING X 9/16” LONG
· (1)     .047 DIA. WIRE X 8 1/2” LONG
· (4)     .047 DIA. WIRE X 1 1/2” LONG
· (1)     .047 DIA. WIRE X 5 3/4” LONG
· (2)      WOOD 1/2” HALF ROUND X 1 1/16”
· (2)      BALSA BLOCK 1/2” X 1” X 1 5/8”
· (1)      BALSA BLOCK 1/2” X 1 X 1 7/8”
· (1)     1/4 DIA X 1/2” WOOD ROUND ROD FOR SPARE TIRE
· (1)     STYRENE .030 X .100  X 3 1/2” LONG FOR MARKER LIGHTS
· (1)     STYRENE .060 X .188  X 1 1/4” LONG FOR TAIL LIGHTS
· (1)     INSTRUCTIONS
 
 
 
Back to content | Back to main menu